홈 · 산업용 및 과학용 · 절삭 공구
1 / 6
1 / 6

    두 번 탭하면 확대돼요 사진을 누르면 확대돼요

    Accusize Industrial Tools 13/16인치 X2인치 절삭 깊이 H.S.S. 환형 커터, 파일럿 핀 1개, 2081-2018핀

    가격 데이터가 아직 부족해요

    이력이 더 쌓이면 정확한 판단을 보여드릴게요.

    $369.97 497,286원

    11월 2일 기준 아마존 실시간 가격 확인 ↗

    아마존에서 구매 ↗

    해외직접배송 · 관세·배송비 별도

    가격 변동

    기록된 2일 동안 가격 변동 없음

    현재 497,286원

    그래프 로딩 중…

    아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

    ⇄ 다른 상품과 가격 추이 비교

    한눈에 요약

    Accusize Industrial Tools 13의 가격은 11월 2일 기준 $369.97(약 497,286원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

    한국까지 예상 비용

    상품가
    $369.97 (약 497,286원)
    면세 한도
    $200 (목록통관) · 초과라 전액 과세
    예상 관세
    39,783원 (일반 공산품 8%)
    예상 부가세
    53,707원 (10%)
    예상 합계
    약 590,776원 + 배송비
    배송비 넣어 다시 계산해 보기 →
    • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
    • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
    • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
    • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

    상품 특징

    • Industrial & Scientific
    • Industrial Drill Bits
    • Metalworking & Multipurpose Drill Bits
    • Annular Cutters
    • Image Unavailable Image not available forColor:
    • 13/16" Diameter, 2" Depth Cutting: Premium H.S.S. annular cutter for precise, efficient drilling in steel with a 2" cutting depth for comprehensive applications, 10-annular-cutter set.
    • Accelerates Drilling Process: Capable of drilling holes up to ten times faster than traditional drill bits, ideal for large and complex drilling tasks.
    • 1/4" Pilot Pin Included (0600-0090): Ensures accurate hole alignment and superior drilling precision with a 4" overall length.
    • 3/4" Weldon Shank: Offers wide compatibility with drilling machines, securing a stable and reliable drilling experience.
    • Clean, Machine-Finish Holes: Eliminates the need for reaming post-drilling when used with appropriate lubricant, enhancing productivity.
    • Cutting Diameters range from 7/16" to 3-3/8"
    • Depth of Cut: 2''
    • Cut slotting and overlapping holes, and outside edge in steel accurately, quickly and safely.
    • Compared to usual drill bits, it drills larger diameter holes up to 10 times faster.
    • Made of tough and high-speed tool steel – more durable than carbide-tipped cutters
    • With the use of lubricant, it gives machine-finish holes without the need of reaming.
    • American Standard (ANSI)
    • Cutter diameter 7/16" to 1/2" are with 3/4" Weldon shank, Hole size of pilot pin = Dia. 6.50mm
    • Cutter diameter 9/16" to 2-11/32" are with 3/4" Weldon shank, Hole size of pilot pin = Dia. 1/4"
    • Cutter diameter 2-3/8" to 4" are with 1-1/4" Weldon shank, Hole size of pilot pin = Dia. 5/16"
    • Good for harder steel.
    • Drill much larger holes and require less force and time than standard twist bits.
    • Take less horsepower, suitable for lower power machines.
    • Significantly faster than interpolating with an end mill.
    • Much more long-lasting than twist drills or hole saws.
    • Less expensive than indexable drills, twist drills, and end mills.
    • Eject a ‘slug’, the cylindrical steel from the cutter’s center, after the hole is cut. Chips are produced from the outside cutting edges.
    • Every 2 cutting teeth = 1 group
    • The height difference between the tooth shapes optimizes the geometry of cutting edges.
    • Grouped and layered cutting and optimized centring improve the removal of chips and give a fast feed rate.
    • It increases cutting performance and reduces cutting force.
    • The cutting angles are effective for general use in various sorts of steel.
    • The U-shaped recesses improve the chip removal performance.
    • The special geometry of the recesses reduces the thermal load on the cutter since most of the heat produced during cutting is removed with the chips.
    • The spiral-shaped guide chamfers reduce the friction between the core drill and the workpiece.
    • #303,377 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
    • #159 in Annular Cutters
    • The Accusize Industrial Tools 13/16'' X2'' Cutting Depth H.S.S. Annular Cutter set, featuring a 1 Pc Pilot Pin (2081-2018Pin), marks a significant advancement in metalworking eff