24V Aluminum Housing LED Light Kit(2Pcs) for Flashfoge AD5X/ AD5M/ 5M Pro: Magntic Soft Diffuser Cover 36 Pcs Bright Cold White Lamp Beads Strip to Chamber Brightness 3D Printer Accessories

["The upgrade light panel set is compatible with Flashforg Adventuer AD5X/ 5M/ 5M Pro, directly replace for the led when the original one is broken. No requires extra DIY or 3D printed parts","Voltage: 24V, each light strip is approximately 1.5W, if the two light strips are connected in series via a PCB adapter board, the total power is approximately 3W, low power and high brightness. Made of aluminum alloy housing, excellent heat dissipation","21cm/8.27in length light board contains 36pcs illuminated led chips, stabilised constant current light can create a comfortable and even healthy spatial light sense for AD5M, provide even, glare-free illumination across the 235x235mm build plate","Easy to install, with a magntic design, no drilling or mounting brackets required, and can be easily adjusted or repositioned at any time. Good modification allows better viewing of camera viewing, hotend extruder print head, 0.4mm brass nozzle or 3d printings part, operation of the printer, replacement of 1.75mm filament etc","If you are installing just one single light bar, connect cable to the motherboard at the rear of machine for power. If you are installing two LED, connect both cables to the PCB adapter board (2-in-1 splitter), then use a shorter cable to connect to the LED port on the motherboard for power, light strip attach to both sides of the machine's metal frame. Tip: Tidy up cables to prevent impact with the print head, which could cause calibration issues with the X Y axis"]