T-0160 Extension Housing Bushing Driver Remover Installer Tool Tail Shaft Bushing Puller Kit Removal Transmission Tool For GM 200, 200-4R, 180, 350, For GM Borg-Warner T5, Tremec T5, World-Class T-5

["APPLICATION: The T-0160 extension housing bushing puller removal tool is compatible with GM 180, 200, 200-4R, 350, For GM Borg-Warner T5, Tremec T-5, World-Class T-5 transmissions. Remove bushings with a min ID of 1.460\" and a max OD of 1.530\". Maximum shaft diameter is 1.25\".","EASY TO USE: The T-0160 extension housing bushing removal tool is designed for removing tail shaft bushing on transmissions. The extension housing bushing can be easily removed and installed without removing the extension housing. The tool is inserted through the bushing and the drive screw is tightened to draw the bushing out of the housing.","SPECIAL TOOL: The T-0160 extension housing bushing puller is designed for removing tailshaft bushing on 350, 180, 200, 200-4R with trans in car. The bushing can be removed efficiently from the transmission. When removing the bushing, the right tool can avoid damage to other parts of the transmission.","MATERIAL: The T-0160 extension housing bushing removal tool is made of steel, treated with forging, the strength and toughness of the tool are improved.","NOTE: When using tool to remove the bushing, you need to refer to the vehicle's maintenance manual to ensure that the correct method and tool are used. At the same time, pay attention to safety and avoid damage to other parts of the transmission. If you are not sure how to operate, it is best to seek help from a professional technician."]