COMTREE Bamboo Original Cool Plate SuperTack 257x257mm Dual-Sided PEI Build Plate for Bambu Lab P1S/P1P/X1C/X1E/A1 3D Printer,Flexible Print Bed Removable Surface Platform,Designed for PLA and PETG

["Say Goodbye to Print Failures: SuperTack coating provides ultra-strong adhesion to PLA and PETG filaments, even at lower heatbed temperatures. It enhances printing success by eliminating adhesion issues, reduces warping when printing large objects and works well with surfaces that are in bad shape","Long Lasting Performance: The SuperTack coating is durable, retaining its sticky properties even after extensive use. This results in a longer lifespan for the printing plate, reducing printing costs (less than 20% adhesion loss after 300 prints) and lowering carbon emissions.","Smooth & Natural Surface Finish: The SuperTack coating can impart a smooth and matte texture to the bottom surface of the printed object, better blend-in with other surfaces.","Energy Saving: The SuperTack coating requires only an extremely low heatbed temperature to ensure that printed objects adhere securely. This means you can save a significant amount of energy during heating, leading to lower power bills and, more importantly, helping to protect our planet.","How to remove prints from SuperTack: Use the scraper included with your printer to gently lift the print, then pry it off carefully. If the print is sticking too tightly, heat the plate on the heatbed to 50°C to assist with removal.","Note: Do NOT print with TPU filament, as it will damage the build plate. SuperTack provides good adhesion without adhesive or frequent cleaning. You can clean the surface with water and detergent if heavy dirt appears. Do NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the SuperTack surface.","Bamboo PLA Silk material exhibits strong adhesion on the SuperTack build plate, which may damage printed models. Therefore, we do not recommend using Bamboo PLA Silk material on the SuperTack build plate. For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in Bamboo Studio and evaluate material compatibility based on the specific conditions"]