4 PK Replacement Air Filter for Bambu Lab P2S X2D, HEPA + Activated Carbon Structure Captures Particles and VOCs, Upgraded Design Over Factory Carbon Only Filter,P2S X2D 3D Printer Air Purifier
36,200원
역대 최저
36,200원
2026-06-01
역대 최고
53,380원
2026-05-26
평균가
46,499원
미국 아마존
가격 비교 불러오는 중…
가격 변동 그래프
그래프 로딩 중…
쿠팡에서 더 저렴한 가격을 찾아보세요
쿠팡에서 "PK Replacement Air Filter Bambu Lab P2S" 검색이 포스팅은 쿠팡 파트너스 활동의 일환으로, 이에 따른 일정액의 수수료를 제공받습니다.
상품 특징
["【Upgraded Dual Layer vs Original Carbon Only】 The original Bambu Lab P2S X2D air filter contains activated carbon only. This upgraded replacement filter adds a HEPA layer, giving you both VOC absorption and particle capture in one cartridge. More complete air filtration for your print chamber","【HEPA Layer Captures Microscopic Particles】 Unlike the original carbon only filter that cannot capture solid particles, this filter features a HEPA layer that traps fine dust, microplastics, and airborne particles as small as 0.3 microns. These particles are generated during printing and can accumulate inside your printer. Now you can remove them along with VOCs","【Activated Carbon Removes VOCs and Odors】 The activated carbon layer adsorbs volatile organic compounds and unpleasant odors released when printing with ABS, ASA, PC, nylon, and other engineering filaments. Same VOC removal performance as the original, plus particle filtration the original cannot provide","【Better Protection for Your Health and Workspace】 Prolonged exposure to 3D printing emissions may include both chemical fumes and ultrafine particles. The original carbon only filter addresses only the chemical side. This HEPA plus carbon filter addresses both, giving you cleaner air and better protection for you and your family","【Direct Fit Easy Installation】 Despite the upgraded dual layer construction, this filter is designed as a direct fit replacement for the original. No modifications needed. Lower the heatbed, unclip the filter cover on the right side, pull out the old carbon only filter, insert this HEPA and carbon filter, and snap the cover back. Takes less than one minute","【4 Pack Value for Regular Maintenance】 This 4 pack gives you a full year of clean air for your P2S or X2D. The original carbon only filter needs replacement every 1440 printing hours (about 60 days). With this 4 pack, you have three spare filters ready when you need them. Never run out of clean filtration again"]
스펙 정보
| 브랜드 | Wefuit |
|---|---|
| 패키지 크기 | 20 x 8 x 20 cm |
| 패키지 무게 | 13 ounces |
| 배터리 필요 여부 | 불필요 |