4PCS CF12KT CF12 2 Pin 12V LED Flasher Relay 4 Pack, Yellow Orange Turn Signal Blinker Hazard Relay, Adjustable 50-200 C/M, B/L Terminals, 21W x2 + 3.4W, Fits 12V Car Motorcycle Scooter ATV UTV

["[CF12KT / CF12 2-PIN SPEC CHECK] 4-pack CF12KT / CF12 style electronic LED flasher relay for 12V turn signal and blinker circuits; yellow-orange housing, 2 male blade terminals, B/L base marking, and housing marking DC12V, 50 c/m-200 c/m, 21W x2 + 3.4W. Before ordering, match your original flasher model/marking, 2-pin layout and 12V system.","[TURN SIGNAL / HAZARD FUNCTION] Built for 12V indicator, blinker and hazard-warning flasher circuits that use a 2-pin relay. May help with fast blink, no blink or uneven LED turn signal flashing only when diagnosis confirms the original flasher relay is the cause.","[B/L TERMINAL VERIFICATION] Check your socket before installation: B / + / battery side is power input, and L / load side is turn signal output. Terminal labels, polarity and blade orientation must match your original relay/socket. Do not install into 3-pin, 4-pin, 5-pin or different keyed sockets.","[COMPATIBLE WITH 12V PLATFORMS] Fits 12V cars, motorcycles, scooters, ATVs, UTVs, mopeds and small vehicles only when they use a CF12 / 2-prong flasher socket and 12V turn signal circuit. No specific year, make or model fitment is claimed.","[LED CONVERSION CHECK] Useful for LED turn signal conversions where lower current may cause hyperflash on some vehicles. Also check bulb type, wiring, ground, fuse, hazard switch and socket condition before replacing the flasher.","[INSTALLATION NOTES] Turn off power and disconnect the battery when appropriate; pull the old relay straight out, avoid forcing the socket, inspect for loose terminals, corrosion, water intrusion or heat damage, then test left turn, right turn and hazard operation.","[NOT FOR WRONG SOCKETS] Not for 6V or 24V systems, CAN-bus modules requiring coded electronics, integrated body-control-module flashers, or vehicles using 3-pin/EP34/CF13, 5-pin/EP27, 8-pin/CF18 or model-specific relay shapes.","[AFTERMARKET REPLACEMENT NOTE] This is an aftermarket replacement flasher relay; vehicle names and part numbers are used only as compatibility check aids. Confirm CF12KT / CF12 style, 12V voltage, B/L 2-pin layout and original relay marking before purchase."]