AZ2800-2C-24A T92P11A22-24 4-1393211-3 Power Relay, 24VAC Coil, DPDT 2 Form C, 40A Max / 30A Contact, Non-Latching, Panel/Flange Mount, 0.250 in Quick Connect Tabs, 8-Terminal, 1 Pack

["[MODEL & SPEC CHECK] Includes 1 power relay. Match AZ2800-2C-24A, T92P11A22-24, 4-1393211-3 or T92-P11A22 24 before ordering. Confirm 24VAC coil, DPDT / 2 Form C contacts, 8-terminal quick-connect layout, panel/flange mount and load rating.","[24VAC COIL / DPDT 2 FORM C] AC coil, non-latching / monostable relay with two changeover contact sets. The terminal map shown on the relay uses coil terminals 0 and 1, with contact groups 2-4-3 and 6-8-7 for layout verification.","[LOAD RATING REFERENCE] High-current power relay for compatible control circuits: 40A max normally-open switching/limiting current and 30A contact rating, with normally-closed contacts rated lower by application. Always verify voltage, current and load type.","[PANEL / FLANGE MOUNT] Black rectangular relay body with mounting ears, panel/flange mounting and 0.250 in quick-connect blade terminals. Use only with matching socket/wire terminal fit and the same 8-terminal wiring diagram.","[CONTROL EQUIPMENT USE] Designed for compatible equipment cabinets, control boxes, relay panels and service repairs using the listed model numbers and the same electrical/mechanical format. May help restore operation when diagnosis confirms relay failure.","[INSTALLATION NOTE] Disconnect power before service. Label wires or transfer one terminal at a time. Inspect the socket and wiring for heat damage, corrosion, moisture or loose terminals before installing the relay.","[COMPATIBILITY NOTE] Part numbers and model numbers are used only for compatibility verification. Do not install if the old relay uses a different coil voltage, contact arrangement, terminal size, pin map, mounting style or load rating."]