NR2-93 23-32A Thermal Overload Relay, 3 Pole 1NO 1NC Motor Protector, Class 10A 690V 50/60Hz Plug-in, 1 Pack, Compare to 268145, Compatible with CHINT NC1-40/50/65/80/95 NC7-40~65/80~95

["[MODEL & SPECS CHECK] NR2-93 23-32A thermal overload relay, 1 pack; adjustable 23-32A setting range, AC 50/60Hz up to 690V, Class 10A, 3-phase bimetal design, 3-pole layout, 1NO + 1NC electrically isolated auxiliary contacts. Check relay frame, amp range, contactor model and terminal layout before ordering.","[MOTOR STARTER PROTECTION] Designed for motor starter control panels that use a thermal overload relay for overload and phase-loss protection in 3-phase AC motor circuits. May help restore protection/control operation when diagnosis confirms the old overload relay is damaged, overheated, missing, stuck or cannot reset.","[COMPATIBLE WITH CHINT NC1 CONTACTORS] Compatible with CHINT NC1-40, NC1-50, NC1-65, NC1-80 and NC1-95 contactor applications using NR2-93 frame and 23-32A range. Do not select by amp range alone; NR2-36 also appears in 23-32A but uses a different frame.","[COMPATIBLE WITH CHINT NC7 CONTACTORS] Compatible with CHINT NC7-40~65 and NC7-80~95 contactor applications using NR2-93. Confirm the panel diagram, overload relay cavity, current setting dial, reset mode and wiring position before energizing.","[PLUG-IN CONTROL FEATURES] Plug-in thermal overload unit with manual/automatic reset selector, trip indicator, test button, stop button, temperature compensation and separated 1NO + 1NC contacts for control-circuit feedback. Independent mounting requires the matching base/accessory if used.","[INSTALLATION NOTE] Disconnect and lock out power before service. Match the dial to the motor full-load current and equipment manual, tighten terminals correctly, and inspect wiring, terminals and contactor pins for heat damage, looseness, corrosion or moisture before startup.","[COMPATIBILITY NOTE] Catalog numbers, brand names and model names are used only to verify compatibility. Compare against NR2-93 23-32A, 268145, the original relay marking, frame size, current range, contact layout and equipment diagram before ordering."]