G6B-2114P-US-12VDC Compatible PCB Power Relay, 1 Pc, 12V DC Coil, 5A 250VAC 30VDC Contact, 1 Form A + 1 Form B, 6-Pin Through-Hole Solder Terminal, Non-Latching Fully Sealed Mini Relay

["[MODEL & SPEC CHECK] G6B-2114P-US-12VDC compatible PCB power relay, 1 piece. Match the original relay model, 12V DC coil, 5A contact rating, 1 Form A + 1 Form B / SPST-NO + SPST-NC contact arrangement, 6-pin through-hole solder terminal layout and PCB footprint before ordering.","[ELECTRICAL RATING CHECK] Coil reference: 12V DC, non-latching, 480Ω / 25mA class. Contact rating reference: 5A 250VAC or 5A 30VDC resistive load. Confirm circuit load, coil voltage, contact form, pinout and safety margin; do not exceed the equipment rating.","[PCB FOOTPRINT CHECK] Straight solder pins are intended for through-hole PCB mounting. Verify pin spacing, hole pattern, contact diagram, clearance and relay height before installation. Do not use for different G6B contact forms, socket-only versions, self-clinching layouts or diode/indicator versions unless the schematic matches.","[APPLICATION USE] For electronics repair, industrial control boards, automation output circuits, power management panels and equipment boards that require a relay compatible with the G6B-2114P-US 12VDC 1 Form A + 1 Form B configuration.","[INSTALLATION NOTE] Disconnect power before service, desolder the old relay carefully, clean the PCB pads, check for burnt traces or loose holes, then solder the replacement straight and level. If the original relay, schematic or PCB footprint does not match, do not install."]