9 Pack G5NB-1A-12VDC G5NB-1A DC12 PCB, 12VDC Coil, SPST-NO 1 Form A, 4-Pin Through-Hole Miniature Relay, 3A 250VAC/30VDC, 720Ω Non-Latching Control Board Relay for Appliance Repair

["[MODEL & SPEC CHECK] 9-pack replacement PCB power relay set for boards requiring G5NB-1A-12VDC / G5NB-1A DC12 style relays. Match 12VDC coil, SPST-NO 1 Form A contact form, 4 through-hole PC pins, approx. 720Ω coil resistance, and 3A contact rating before ordering.","[ELECTRICAL RATING] Designed for compatible low-profile control board relay positions using a 12VDC non-latching coil, approx. 16.7mA coil current, 3A contact rating, and 250VAC / 30VDC max switching voltage for matching resistive-load circuits.","[PCB FOOTPRINT CHECK] Confirm the existing board matches the G5NB 1A footprint, 4 solder-pin layout, relay body clearance, and board circuit requirement. This is a through-hole PCB relay, not a plug-in automotive cube relay or socket relay.","[APPLICATION CHECK] For compatible control boards in water heaters, refrigerators, air conditioners, home appliances, small electric appliances, and other low-power control circuits when the board documentation calls for this relay model, rating, and footprint.","[MODEL VARIATION WARNING] Do not substitute for 5V, 18V, 24V, 5-pin, 5A, SPDT, plug-in, socket-mounted, or different-footprint relays. Suffixes such as E, HA, CF, PW, SP, or 1A4 may indicate different capacity, enclosure, insulation, drive, packing, or application requirements.","[INSTALLATION NOTE] Soldering is required. Disconnect power, discharge capacitors if applicable, desolder the old relay carefully, inspect pads and traces for heat damage, and verify coil voltage/contact rating before installing. Electronics repair experience is recommended.","[PACKAGE CONTENT] Includes 9 pieces of G5NB-1A-12VDC style PCB relays. Keep spare relays for repair benches, control board service, small appliance boards, and electronics maintenance where the same model, footprint, and electrical rating are required.","[COMPATIBILITY NOTE] Model numbers and markings are used only to verify compatibility. Match the board part list, original relay marking, terminal layout, coil voltage, contact form, load rating, and PCB footprint before ordering."]