V23074-A1001-A402 VFMA-11F41-S01 1393292-5 4-1904124-2 12V Micro ISO Automotive Replacement Relay 1 Pack, 1 Form A SPST-NO, 25A Contact Rating, Socket Plug-in Fuse Box Power Relay, 614 2245115B

["[PART NUMBER & SPECS] V23074-A1001-A402 12V Micro ISO automotive replacement relay, 1-piece pack. Key check IDs include V23074A1001A402, VFMA-11F41-S01, 1393292-5, 4-1904124-2 and 9-1393292-9; verify the full number, housing diagram and relay layout before ordering.","[ELECTRICAL LAYOUT CHECK] Match 12V coil voltage, 1 Form A / SPST-NO normally open contact arrangement, resistor-suppressed NOR circuit, 119 ohm coil resistance, 680 ohm suppression resistor, quick-connect blade terminals and socket-mount Micro ISO body.","[VISIBLE MARKING CHECK] Compare the original relay housing with V23074-A1001-A402, 12V, 614, 2245115B, PA66-GF25 and the printed circuit diagram. These visible marks are check aids only; use the complete part number and relay layout as the main match point.","[FUSE BOX FUNCTION CHECK] Designed for 12V relay boxes or equipment sockets that use this exact Micro ISO 1 Form A relay type. Depending on the circuit, it may serve power, ABS control, fuel pump, cooling fan, blower fan, door lock, window, wiper, interior light, sunroof, seat control or general control relay functions; confirm the slot legend first.","[INSTALLATION & SOCKET CHECK] Disconnect power before service, pull the old relay straight out, avoid hard prying against the relay box, inspect the socket for heat damage, corrosion, moisture or loose terminals, then insert the replacement relay straight into the matching cavity.","[DIAGNOSIS NOTE] Relay replacement may help when testing confirms a failed, overheated, corroded, missing or sticking relay. It will not fix wiring, fuse, motor, module, switch or damaged socket faults; confirm the root cause before ordering when possible.","[COMPATIBILITY NOTE] This is a part-number and relay-layout based listing, not a full vehicle year/make/model fitment claim. Part numbers and markings are used only to verify compatibility; do not use if voltage, contact form, blade layout, housing size or circuit diagram differs."]