SC-E04H5-C SC-E04 AC Contactor Compatible with Fuji Electric, AC 110V 50Hz / 110-120V 60Hz Coil, 3-Pole Magnetic Contactor, SE16AA-C, 25A Continuous, AC-3 7.5kW 400V, Screw Terminal, 1 Pack

["[MODEL & COIL CHECK] SC-E04 / SC-E04H5-C AC contactor, SE16AA-C marking, AC 110V 50Hz coil; photographed coil marking also shows 100-110V 50Hz / 110-120V 60Hz. 1-pack contactor for control panels using the same model, coil voltage and terminal layout.","[3-POLE POWER CONTACTOR] Main terminals are 1L1-3L2-5L3 line and 2T1-4T2-6T3 load, with A1/A2 coil terminals. Use for matched motor/control circuit switching where the original contactor label and wiring diagram match this SC-E04 configuration.","[VISIBLE RATINGS] Label shows AC-1 Ith / continuous current 25A, Ui 690V and Uimp 6kV; AC-3 ratings include 230V 4kW, 400V 7.5kW and 690V 7.5kW. Always confirm load type, voltage, horsepower/kW and protection before installation.","[FITMENT VERIFICATION] Before ordering, compare the old contactor's model number, coil voltage/frequency, 3-pole contact layout, screw-terminal positions, mounting points and panel wiring. Do not use if your original unit has a different coil voltage, terminal arrangement or rating.","[INSTALLATION NOTES] Disconnect and lock out power before service. Label wires, remove the old contactor straight from the panel, inspect terminals for heat damage, corrosion or loose hardware, then tighten connections to your equipment manual's torque specification.","[REFERENCE NOTE] Product names, model numbers and brand references are used only to help buyers confirm compatibility with SC-E04 / SC-E04H5-C applications. Confirm the original label, wiring diagram and electrical ratings before purchase."]