MOUMOUTEN 108.8Psi(0.75Mpa) Brass Pressure Relief Valve, 100g Heavy Duty Thickened Safety Partial Check Valve with Gasket, G1/2" Interface for Electric Water Heaters

["Material: The 108.8Psi(0.75Mpa) pressure relief valve is made of brass with a thickened valve body, weighing approximately 100g. The G1/2\" threads (inlet and outlet) and silicone gaskets facilitate easy installation, eliminating the need for PTFE Tape.","Check Valve & Pressure Relief: The safety valve has a built-in check valve (one-way valve) to prevent hot water from flowing back into the water supply line, avoiding waste and hot/cold backflow; the pressure relief function automatically opens to drain and relieve pressure when the pressure inside the water heater tank exceeds 108.8Psi(0.75Mpa).","Installation Requirements: If you are replacing an old safety valve, you can refer to the pressure of the original pressure relief valve or the relevant information on the water heater itself. Note: Always turn off the power and water before installation. Install the safety valve with the arrow pointing towards the water heater.","Wide Application: This water heater safety valve is designed as a universal replacement, suitable for residential and apartment use, as well as most commercial applications such as industrial, sanitary, and heating systems. Please confirm your valve size before ordering.","Accessories: To ensure a leak-proof seal from the start, this valve comes with a high-density sealing gasket. This kit allows for quick and easy installation, ideal for DIY homeowners and professional plumbers. Package contents: 1x Safety Valve; 1x Gasket"]