GOOZEEZOO SDR Radioberry Juice USB Board to USB Adapt Board Juice for Raspberry Pi - Radio Card Analog Devices AD9866 & 10CL025 12-bit Broadband Modem

["The radioberry is actual a radio card (raspberry pi hat), which can be plugged into a raspberry pi, forming a Software Defined Radio (SDR). The radio card uses an Analog Devices AD9866 which is a 12-bit broadband modem mixed signal front end that has been repurposed as a direct down conversion (DDC) and direct up conversion (DUC) SDR transceiver covering 0-30 MHz. The radio card uses an Intell Cyclone 10LP FPGA, supporting the 10CL16 and 10CL25. The firmware will be loaded via the raspberry pi.","[Widly Application] 1.Support SDRConsole (V3),Thetis SDR,SPARK SDR,pihpsdr windows or linux. 2.Support 4 receivers+1TX. 3.Support CW Skimmer Server. 4.Max 384khz bandwidth. 5.support windows VBCABLE to run wsjtx. 6.CW Skimmer server dll download https://github.com/k3it/HermesIntf","Power supply for the radio card is provided by the raspberry pi. To control filter boards or other extended hardware there is IN-OUTPUT available. The project is in a 'Perpetual beta' stage. For more information look into: https://en.wikipedia.org/wiki/Perpetual_beta. This project is inspired of all the work of the Hermes Lite 2 group, https://github.com/softerhardware/Hermes-Lite2. Escpecially thanks to Steve Haynal. The wiki and the GitHub repository must help anyone who wants to use this","[Installation Method] 1.Install USB Juice board and Radioberry. 2.Download software. 3.Run SparkSDR.exe","[Note] The input/output connectors of radioberry may not be straightened out, which might be damaged during the long-time shipment, therfore if you find the connectors difficult to fix please tell us, we will help you resolve it together"]