HARFINGTON 10pcs Umbrella Tail Beads 3.6mm Hole Dia 30mm Length Metal Umbrella Bone Cover for Reverse Umbrella Cover Parts, Silver Tone

["Size - Bottom Hole Diameter: 3.6mm / 0.14 Inch; Total Length: 30mm / 1.18 Inch; Bottom Overall Length: 4.3mm / 0.17 Inch; Lower length: 17.3mm / 0.68 Inch; Upper Length: 20mm / 0.79 Inch.","Material - Reverse umbrella tail beads are made of metal. It has the characteristics of corrosion resistance, low density, high hardness and long service life. Suitable for car umbrellas or reverse umbrellas, for large umbrella bone.","Usage - When replacing the umbrella beads, first pull out the bad umbrella beads from the umbrella bone and remove them. Then sew the new umbrella beads according to the pattern on the original umbrella cloth. When sewing, pay attention to sewing in the opposite direction and use it upside down. Finally, put the umbrella bone back in again.","Application - Sometimes you find that the umbrella at home is not damaged as a whole, but the umbrella bead is broken, which makes the umbrella surface unable to support and affect its use. At this time, you only need to buy the umbrella bead accessories and sew them according to the above method to use them normally.","Note - Includes 10 umbrella beads. Can be used for all bead replacements for a ten-bone extra large umbrella. It is recommended to measure the aperture at the bottom of the umbrella rib first and compare the corresponding size of the umbrella bead. If you have any questions, please contact us."]